Plastic granulator is important link in plastics recycling, but also because of the need for plastic shaping, so a special mechanical structure, if not pay attention to the use of mechanical parts, it is easy to cause the occurrence of self damage and accidents of production safety of machinery.
1, the granulation confidential forward operation to avoid reversal.
2, avoid cold granulator machine operation must be fasting, engine chargingoperation, it can avoid the occurrence of stick bar (axle) phenomenon.
Feed 3, granulator outlet, entering the iron and other debris is strictly prohibited tobleed hole. In order to avoid the accident, affecting production.
4, pay attention to the body temperature change, with clean hands to touch the note hands, should immediately warming. Until the sliver touch as normal.
5, bearing reducer parts burned hand, or with the noise should be timely maintenance, adding gas.
6, the host at both ends of the bearing parts bearing chamber hot burning hands or noise, to downtime and add butter. When in normal work, the bearing chamberevery 5-6 days of butter a.
7, pay attention to find out the machine operation rules; such as: high and lowrotating speed, engine temperature, depending on the situation, the timely processing.
8, the body of unstable operation, should pay attention to check the gap couplinganastomosis are too, to timely adjust loose some.
|
Your Current Location：